Home   /  Learning Centre   /  Articles
Clashed Edge Fire Doors Definition: “Clashed edge” means an additional hardwood lipping (usually 6–10mm thick) is applied to the edges of the door, often with a rebated or stepped joint.
Think outside the door! The wedging gap is defined as the space between the outside of the door frame/jamb and the surrounding wall structure. It’s a mandatory requirement that the
Tags play a crucial role in ensuring fire door safety and compliance. Issued by the door manufacturer following installation and the submission of completed declarations, these tags serve as official
There are many factors that contribute to lead times. Long lead times – a common misconception in the marketplace that’s typically the result of a previous bad experience with a
How do you calculate clear opening width of a fire door? The clear opening width refers to the unobstructed horizontal space through which a person can pass when the door
If you’re experiencing moisture ingress into an internal timber fire door, it’s important to address it promptly. Moisture can cause the door to swell, warp, delaminate, or rot—compromising its fire
So, what is HPL facing & how does it work? HPL stands for High Pressure Laminate and is a durable, cost-effective material created by pressing multiple layers of kraft paper,
This is a common question – and an important one. Many architects and designers want the visual warmth and texture of timber veneer while still meeting fire‑door compliance requirements. The
When working through door schedules, frames, and fire‑rated details, jamb types can quickly cause confusion. Both Flat Jambs and Grooved Jambs are commonly used in fire door installations, but each
Designing a bespoke fire door is entirely achievable, as long as aesthetics and compliance are aligned from the outset. The most effective way to do this is to carry out
Choosing the right fire door for an apartment requires careful consideration of compliance, safety, aesthetics, and performance. Fire doors must not only meet the New Zealand Building Code but also
Intumescent seals are a critical part of a fire door system. They are designed to expand under heat and seal the gap between the door and the frame, helping slow
Vision panels are an important part of fire door design. They improve visibility, support accessibility, and contribute to a more open feel within a building. However, the maximum allowable vision
Installing a fire door correctly is essential to ensuring it performs as required during a fire. While New Zealand does not legally require a certified fire door installer, using a
In New Zealand, fire doors are a key component of a building’s passive fire protection system. To verify compliance with the NZ Building Code, particularly Clauses C1–C6 (Protection from Fire),
Can I Retrofit a Vision Panel Into My Fire Door? A common question we are asked is whether it is possible to retrofit a vision panel into an existing fire
How Much Does a Smoke Door Cost? Determining the cost of a smoke door can be challenging, as smoke door pricing is rarely published upfront. Unlike standard interior doors, fire
What do the fire door rating numbers mean on a fire door tag? Understanding the fire door rating is essential for confirming fire door compliance and ensuring a door performs
Can I Alter a Fire Door Myself? Why DIY Repairs Are Risky Can I alter a fire door myself or carry out a fire door modification such as repairing damage
Why Is Getting Fire Door Primary Test Data So Difficult? If you’ve tried to get primary test data to support the fire door systems you’re specifying, you’ve likely found the
Understanding Fire Door Sizing Requirements: Ensuring Safety and Accessibility When designing, specifying, or installing fire doors, one of the most important considerations is ensuring the correct sizing to maintain both
What Are the Best Fire Doors for Use in Aged Care Facilities? Selecting the right fire doors for an aged care facility can feel overwhelming, particularly for providers navigating compliance,
What Could Go Wrong if You Install Fire Doors in Untested Wall Systems? Installing a fire door in a wall system that hasn’t been tested and certified can result in
7 Common Fire Door Problems and How to Avoid Them Fire doors are essential for fire safety compliance and protecting lives and property. However, even the best fire doors can
Fire Door Installation: Avoid Non-Compliance and Ensure Safety One of the biggest issues with non-compliant fire doors is incorrect installation. To keep your building safe and compliant, here are key
One common challenge on construction projects is that architectural drawings and specifications often reach the construction stage without being fully detailed or compliant. This can lead to delays, confusion, and
At Soteria Doors, we take pride in our high-quality fire doors, all designed, developed, and manufactured in Northland, New Zealand. Every door is hand-crafted and made to order, with meticulous
How Much Does a 60-Minute Fire Door Cost? Complete NZ Pricing Guide Trying to figure out how much a 60-minute fire door set costs for your project? You’re not alone.
Specifying a Fire Door in New Zealand: A Complete Step-by-Step Guide Specifying the correct fire door can feel like a minefield.Where do you begin?Will the door be compliant?What standards apply?Will
Struggling to Choose the Right Fire Door Hardware? Selecting the right fire door hardware can be confusing, but it’s crucial for safety, compliance, and reliability. Before making any decisions, always
